GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Express - AWD 🢒 Body 🢒 Interior Trim 🢒 Body Side Rear Garnish Molding Replacement

Removal Procedure

    Object Number: 885209 Size: SH
  1. Open cover and remove screw, if equipped with roof rail inflatable restraints.
  2. Pull out on the center pillar garnish (1 ,2) molding to disengage the clips.
  3. Remove the center pillar garnish molding.

Installation Procedure

    Object Number: 885209 Size: SH
  1. Align the body side upper (1 ,2) garnish molding clips to the holes in the body.
  2. Push in on the body side upper (1 ,2) garnish molding to engage the clips.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install screw and close cover, if equipped with roof rail inflatable restraints.

    4. Tighten
    Tighten the screws to 2 N·m(18  lb in).