Symbol | Description |
|---|---|
| ABS: Refer to ABS Description and Operation in Antilock Brake System |
(CANADA) AIR BAG (U.S.) | Air Bag: Refer to SIR System Description and Operation in SIR |
(CANADA) BRAKE (U.S.) | Brake: Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
| Charge: Refer to Charging System Description and Operation in Engine Electrical |
CHECK GAGES | Check Gages: Refer to Indicator/Warning Message Description and Operation |
| DRL: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation in Seat Belts |
| High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| Low Coolant: Refer to Cooling System Description and Operation in Engine Cooling |
(Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Refer to: Powertrain Control Module Description in Engine Controls - 4.3L Powertrain Control Module Description in Engine Controls - 5.0L and 5.7L Powertrain Control Module Description in Engine Controls - 6.5L Powertrain Control Module Description in Engine Controls - 8.1L |
SECURITY | Security: Refer to Theft Systems Description and Operation in Theft Deterrent |
SERVICE THROTTLE SOON | Service Throttle Soon: Refer to Powertrain Control Module Description in Engine Controls - All L |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
WAIT TO START | Wait To Start: Refer to Glow Plug System Description in Engine Controls - 6.5 L |
WATER IN FUEL | Water In Fuel: Refer to Indicator/Warning Message Description and Operation |
Check Gages
The CHECK GAGES indicator illuminates in the IPC when the one of the following conditions exist:
| • | The engine coolant temperature (ECT) is at or above 118° C (244°F). |
| The IPC receives the ECT information through a dedicated hardwire input from the PCM. |
| • | The engine oil pressure (EOP) is at or below 34 kPa (5 psi). |
| The IPC receives the EOP information through a dedicated hardwire input from the EOP sensor. |
Water In Fuel
The WATER IN FUEL indicator illuminates in the IPC when the water in fuel sensor detects water in the fuel tank. The water in fuel sensor provides a ground to the water in fuel indicator control circuit in order to illuminate the WATER IN FUEL indicator.
