12-Volt Accessory Power Receptacle Replacement Luxury Y91

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Remove the instrument panel (IP) extension. Refer to Instrument Panel Extension Replacement .
3. Disconnect the electrical connectors (1) from the 12-volt power supply socket (2).
4. Remove the retaining ring (3) from the 12-volt power supply socket by unscrewing the ring.
5. Remove the 12-volt power supply socket from the IP extension.

1. Install the 12-volt power supply socket to the IP extension.
2. Install the retaining ring (3) to the 12-volt power supply socket (2).
3. Connect the electrical connectors (1) to the 12-volt power supply socket.
4. Install the IP extension. Refer to Instrument Panel Extension Replacement .
5. Connect the negative battery cable.