Roof Console Replacement Luxury Y91

1. Open the garage-door opener assembly on the overhead console. Refer to Garage Door Opener Replacement .
2. Remove the screws from inside the garage door opener housing.
3. Position the video screen in the downward position.
4. Remove the screws that retain the video screen (1) to the overhead console (2).
5. Remove the overhead console from the headliner by pulling in a downward position in order to disengage the retaining clips.
6. Disconnect the electrical connectors from the overhead console.

1. Connect the electrical connectors to the overhead console.
2. Install the overhead console to the headliner by pushing up until the retaining clips engage.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the screws that retain the video screen (1) to the overhead console (2).

Tighten
Tighten the video screen screws to 2 N·m (18 lb in).

4. Position the video screen in the up position.
5. Install the screws into the garage door opener assembly.

Tighten
Tighten the overhead console screws to 2 N·m (18 lb in).

6. Install the garage door opener. Refer to Garage Door Opener Replacement .