For 1990-2009 cars only
- Using a feeler gage, measure the piston travel between the intermediate clutch backing plate and the intermediate clutch backing plate retaining ring (629).
- If piston travel is not correct, inspect for the following conditions and repair as required.
Piston Travel Specification
Piston travel should be 1.02-2.72 mm (0.040-0.107 in).
| • | Proper assembly |
| • | Dirt or burrs |
| • | Worn clutch plates, backing plate, or wave plate |
| • | Worn case area in the snap ring groove |
