GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the left rear quarter trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.
  2. Disconnect the electrical connector from the actuator.
  3. Remove the retaining screws from the actuator.

  4. Object Number: 301700  Size: SH
  5. Remove the air temperature actuator from the vehicle.

Installation Procedure


    Object Number: 301700  Size: SH
  1. Install the air temperature actuator to the vehicle.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the retaining screws to the actuator.
  4. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  5. Connect the electrical connector to the actuator.
  6. Install the left rear quarter trim panel. Refer to Body Side Trim Panel Replacement - Left Side in Interior Trim.