GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 28585 Snap Ring Remover


    Object Number: 749500  Size: SH
  1. Remove the front internal gear thrust bearing (529).

  2. Object Number: 749503  Size: SH
  3. Remove the low and reverse clutch plate retaining ring (518) from the transmission case assembly with J 28585 .

  4. Object Number: 1850798  Size: SH
  5. Remove the low and reverse clutch backing plate (520).
  6. Remove the 5 low and reverse clutch fiber plate assemblies (516).
  7. Remove the 4 low and reverse clutch steel plates (517).
  8. Remove the low and reverse clutch apply plate (515).

  9. Object Number: 749518  Size: SH
  10. Remove the front internal gear (526). The front internal gear thrust bearing assembly (519) and the thrust washer race (530) are on the back side of the front internal gear (526).