GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Air Cleaner Inlet Duct Replacement

Removal Procedure

    Object Number: 1325734 Size: SH
  1. Loosen the clamps at both ends of the air cleaner intake duct.
  2. Remove the positive crankcase ventilation (PCV) fresh air pipe from the air cleaner intake duct.
  3. Remove the air cleaner intake duct from the mass air flow (MAF) sensor and throttle body.

Installation Procedure

    Object Number: 1325733 Size: SH
  1. Install the air cleaner intake duct to the MAF sensor and throttle body.
  2. Install the PCV fresh air pipe to the air cleaner intake duct.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the clamps at both ends of the air cleaner intake duct.

    4. Tighten
    Tighten the clamps to 4 N·m (35 lb in).