Electronic Power Steering Motor Control Module Replacement. Chevrolet Equinox 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Electronic Power Steering Motor Control Module Replacement

Callout	Component Name
Preliminary Procedure Remove the knee bolster. Refer to Knee Bolster Replacement.
1	Electronic Power Steering Motor Control Module Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 11.5 N·m (102 lb in)
2	Electronic Power Steering Motor Control Module Procedure Disconnect any electrical connectors as needed. After repairs, perform the proper programming and calibration procedures. Refer to Power Steering Control Module Programming and Setup.

Callout

Component Name

Preliminary Procedure

Remove the knee bolster. Refer to Knee Bolster Replacement.

Electronic Power Steering Motor Control Module Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
11.5 N·m (102 lb in)

Electronic Power Steering Motor Control Module

Procedure

Disconnect any electrical connectors as needed.
After repairs, perform the proper programming and calibration procedures. Refer to Power Steering Control Module Programming and Setup.