Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the driver seat. Refer to Front Seat Replacement - Bucket .
2. Remove the left carpet retainer. Refer to Front Carpet Retainer Replacement .
3. Remove the left lower center pillar molding. Refer to Center Pillar Lower Garnish Molding Replacement.
4. Move the carpet back enough to gain access to the communication interface module battery.

1

Communication Interface Module Battery Nut (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Communication Interface Module Battery

Tip
Disconnect the electrical connector.