GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Equinox 🢒 Engine 🢒 Engine Mechanical - 3.4L 🢒 Camshaft Rear Bearing Hole Plug Replacement

Removal Procedure
  1. Remove the engine flywheel. Refer to Engine Flywheel Replacement .

    2. Object Number: 105921 Size: SH
  2. Remove the camshaft rear bearing hole plug.

Installation Procedure

    Object Number: 105921 Size: SH

    Important: Inspect plug bore for old sealant. Ensure bore is clean and free of knicks and burs.

  1. Apply sealer to the camshaft rear bearing hole plug. Refer to Adhesives, Fluids, Lubricants, and Sealers for the correct part number.
  2. Install the camshaft rear bearing hole plug.

    3. Object Number: 105922 Size: SH
  3. Ensure that the camshaft rear bearing plug is installed to specifications.
  4. Install the engine flywheel. Refer to Engine Flywheel Replacement .