Preliminary Procedures

1. Remove the rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .
2. Loosen the retractor anchor bolt cover on the upper rear pillar. Gently unsnap cover or it may break from too much force.

1

Rear Seat Belt Retractor Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Apply Permatex® 24200 or equivalent on all seat belt fasteners prior to installation.

Tighten
45 N·m (33 lb ft)

2

Rear Seat Belt Retractor

Tip
Make sure alignment slots are aligned correctly on reinstallation.