Callout
| Component Name
|
|
Caution: Refer to Brake Fluid Irritant Caution in the Preface section.
Preliminary Procedures
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the tire and wheel. Refer to
Tire and Wheel Removal and Installation
.
|
1
| Brake Hose Fitting Bolt
Notice: Refer to Fastener Notice in the Preface section.
Tighten
52 N·m (38 lb ft) |
2
| Brake Hose Fitting Gasket (Qty: 2)
Tip
DO NOT reuse the brake hose fitting gaskets. Install NEW gaskets. |
3
| Brake Hose Bolt
Tighten
12 N·m (106 lb in) |
4
| Brake Hose Bracket Bolt
Tighten
12 N·m (106 lb in) |
5
| Brake Pipe Fitting
Tip
| • | Use a backup wrench when removing or installing brake pipe fittings. |
| • | Cap or plug the brake pipe fitting to prevent brake fluid leaks and contamination. |
Tighten
18 N·m (13 lb ft)
|
6
| Brake Hose
Tip
Bleed the hydraulic brake system. Refer to
Hydraulic Brake System Bleeding
. |
