GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Stop Lamp Switch Adjustment

Adjustment Procedure

    Object Number: 931241 Size: SH

    Notice: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.

  1. Disconnect the electrical connector from the stop lamp switch.

    2. Object Number: 931292 Size: SH
  2. Rotate the switch counterclockwise and remove the switch from the switch retainer.

    3. Important: Do NOT depress the brake pedal assembly during the stop lamp switch installation. This will cause a drag condition on the brake.

  3. Install the switch to the bracket by turning and pushing the switch until the switch bottoms on the brake pedal.
  4. Connect the electrical connector to the stop lamp switch.
  5. Inspect the stop lamps for proper operation