GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 980449  Size: SH
  1. Using a small, flat-bladed tool, pry at the forward edge of the reading lamp cover to disengage the forward clips. Slide the cover forward to disengage the rearward hooks.
  2. Disconnect the OnStar® microphone harness.
  3. Depress the microphone snap tabs.
  4. Push on the rear face of the microphone to remove the microphone from the cover.

Installation Procedure


    Object Number: 980449  Size: SH
  1. Position the OnStar® microphone in the cover.
  2. Install the microphone by snapping into place.
  3. Connect the wiring harness.
  4. Snap the cover to engage the snap tabs.
  5. Slide the cover rearward to engage the rear hooks.
  6. Snap the reading lamp cover into place.