GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Equinox 🢒 Body 🢒 Lighting Systems 🢒 High Mount Stop Lamp Replacement

Removal Procedure
  1. Remove the spoiler from the liftgate. Refer to Rear Spoiler Replacement in Body Rear End.

    2. Object Number: 1344337 Size: SH
  2. Remove the spoiler to high mounted stop lamp screws.
  3. Disconnect the electrical connector.
  4. Disconnect the washer hose.
  5. Remove the stop lamp from the spoiler.

Installation Procedure

    Object Number: 1344337 Size: SH
  1. Position the high mounted stop lamp to the spoiler.
  2. Connect the washer hose.
  3. Connect the electrical connector.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the spoiler to the high mounted stop lamp screws.

    5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the spoiler to the liftgate. Refer to Rear Spoiler Replacement in Body Rear End.