GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1339124  Size: SH
  1. Remove the rear sill plate. Refer to Liftgate Door Sill Plate Replacement .
  2. Move the rear seat forward.

  3. Object Number: 1339131  Size: SH
  4. Remove the load floor.

  5. Object Number: 1339129  Size: SH
  6. Disconnect the cargo hooks in the rear side trim panel.

  7. Object Number: 1339120  Size: SH
  8. Remove the push pins from the side trim.

  9. Object Number: 1205676  Size: SH
  10. If necessary, remove the jack to access the driver side rear side trim panel.
  11. Remove the rear side trim panel.

Installation Procedure

  1. Align the rear side trim panel. Snap the panel into place.

  2. Object Number: 1339120  Size: SH
  3. Install the push pins to the side trim.
  4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1339129  Size: SH
  5. Install the cargo hooks.
  6. Tighten
    Tighten the cargo hooks to 25 N·m (18 lb ft).


    Object Number: 1339131  Size: SH
  7. Install the load floor.
  8. Install the rear sill plate. Refer to Liftgate Door Sill Plate Replacement .