GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 980996  Size: SH
  1. Loosen the screw in the base of the mirror.
  2. Remove the mirror from the mounting pad.
  3. Disconnect the rearview mirror wiring harness, if applicable.

Installation Procedure


    Object Number: 980996  Size: SH
  1. Install the mirror to the mounting pad.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the screw that retains the mirror base to the mounting pad.
  4. Tighten
    Tighten the mirror set screw to 2 N·m (18 lb in).

  5. Install the rearview mirror wiring harness, if applicable.
  6. Refer to Control Module References for programming and setup information.