Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

Caution: Refer to SIR Caution in the Preface section.

Preliminary Procedures

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
2. On back side of the steering wheel are 2 circular openings, place the wheel so that one opening is on top.
3. Using a blunt-ended tool, push the spring fastener inward through the access hole. Repeat the step for the other opening.

1

Steering Wheel Inflatable Restraint Module

Tip

1. Release the connector position assurance (CPA) retainer.
2. Disconnect the electrical connectors.
3. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .

Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

Caution: Refer to SIR Caution in the Preface section.

Preliminary Procedure

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.

1

Steering Wheel Inflatable Restraint Module

Procedure

1. On the back side of the steering wheel are 4 triangular holes, two on each side.
2. Use the J 44298 to release the SIR module retention springs at 2 points simultaneously by pushing inward. Repeat the step for the other side.
3. Release the connector position assurance (CPA) retainer.
4. Disconnect the electrical connectors.
5. After removal, fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.

Special Tools

J 44298 Driver Air Bag Removal Tool