For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable.
- Remove the upper and lower steering coumn cover panel screws.
- Remove the upper and lower steering column cover panels.
- Remove the wiper switch by pushing in on the tabs on the top and the bottom of the switch housing.
- Disconnect the electrical connectors from the wiper switch. Disconnect the cruise control connector, if equipped.
Caution: Refer to Battery Disconnect Caution in the Preface section.
Installation Procedure
- Connect the electrical connector to the wiper switch. Connect the cruise control connector, if equipped.
- Install the wiper switch by snapping it into the switch housing.
- Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.
- Connect the negative battery cable.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the upper and the lower steering column cover panel screws to 2.5 N·m to (22 lb in).
