Tools Required

DT 46475 (DW260-070) Auto Transaxle Plug Remover/Installer

Notice: Refer to Fastener Notice in the Preface section.




1. Install the oil pan, oil gasket, and the oil pan bolts.

Tighten
Tighten the oil pan bolts to 6 N·m (53 lb in).




2. Install the oil cooler inlet and outlet pipes. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .



3. Use the DT 46475 (1) to install the transaxle fluid drain plug.
4. Install the engine under cover. Refer to Engine Cover Replacement in Frame and Underbody.
5. Refill the transaxle fluid. Refer to Transmission Fluid Level Inspection .
6. Connect the negative battery cable.