Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Switch, Door Release

Refer to Passenger Door Latch Release and Power Window Switch and Bezel Replacement .

2

Bolts, Door Panel (Qty: 2)

Tighten
6 N·m (53 lb in)

3

Panel Assembly, Door Trim

1. Use a J 38778 Door Trim Panel Removal Tool in the slot provided at the bottom rear edge of the trim panel.
2. Pull the rest of the pins on the trim panel loose with a sharp motion pulling away from the door.
3. Lift upward on the trim panel to release the clips across the top of the door panel.
4. Disconnect the main wiring harness.

4

Clip, Front Side Door Trim (Qty: 4)

5

Retainer, Front Side Door Trim (Qty: 8)

Tip
Check the grommets that are left in the door to make sure all 8 are still in the door tightly, and with no cracks. If the door panel has been removed twice, replace all grommets to avoid door trim panel rattles.