GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 71215  Size: SH
  1. Remove the seat. Refer to Driver and Passenger Seat Replacement .

  2. Object Number: 281999  Size: SH
  3. Remove the memory seat control module from the seat foam support wires.
  4. Reposition the memory seat control module out through the opening.
  5. Disconnect the harness connectors.

Installation Procedure


    Object Number: 281999  Size: SH
  1. Connect harness connectors to the memory seat control module.
  2. Install the memory seat control module to the seat cushion foam support wires.

  3. Object Number: 71215  Size: SH
  4. Install the seat. Refer to Driver and Passenger Seat Replacement .
  5. Refer to Control Module References for programming and setup information.