1

Did you perform the Vehicle Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

1. Turn OFF the ignition.
2. Disconnect the steering column electronic lock.
3. Turn ON the ignition

Is the Service Column Lock message displayed?

System OK

Go to Step 3

Important: Always perform the setup procedure for the SCLCM. Refer to Control Module Setup .

1. Replace the steering column lock control module. Refer to Steering Column Lock Control Module Replacement .
2. Perform the setup procedure for the steering column lock control module.

Did you complete the replacement?

System OK

--