Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Plate Assembly, Instrument Panel (I/P)

Tip
Remove the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .

2

Screws, Remote Control Door Lock Receiver Bracket (Qty: 3)

Tighten
3 N·m (27 lb in)

3

Bracket, Remote Control Door Lock Receiver

4

Receiver, Remote Control Door Lock

Tip

1. Release the retaining clips to remove the receiver from the bracket.
2. Reprogram the receiver. Refer to Control Module References for programming and setup information.