GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Corvette 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Folding Top Control Module Replacement

Removal Procedure

    Caution: Refer to Servicing Electrical Components Caution in the Preface section.


    Object Number: 1507225 Size: SH
  1. Place the folding top with the #1 bow and #5 bow in the up position.

    2. Object Number: 1509583 Size: SH
  2. Open the stowage compartment lid (1).
  3. Turn the ignition key to the OFF position.
  4. Remove the folding top stowage compartment lower carpet (2) to expose the control module. Refer to Rear Compartment Floor Panel Carpet Replacement in Interior Trim.

    5. Disconnect the electrical connectors (3) from the folding top control module (2).

  5. Remove the control module (4) by lifting up to release the hook and loop fastener.

Installation Procedure

    Object Number: 1509583 Size: SH
  1. Connect the electrical connectors (3) to the folding top control module (4).
  2. Install the folding top stowage compartment carpet (2). Refer to Rear Compartment Floor Panel Carpet Replacement. in interior Trim.
  3. Close the stowage compartment lid (1).
  4. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation.
  5. Refer to Control Module References for programming and setup information.