GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Corvette 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Instrument Panel Inflatable Restraint Module Switch Replacement

Removal Procedure

    Object Number: 629632 Size: SH
  1. Open the instrument panel (IP) passenger compartment door (1).
  2. Use a small flat blade screwdriver behind the top right hand side of the switch mounting to pry the inflatable restraint IP module switch (4) from the switch mounting in the instrument panel (IP) passenger compartment door (1).
  3. Remove the CPA (2) from the wiring harness connector (3).
  4. Disconnect the wiring harness connector (3) from the inflatable restraint IP module switch (4) connector.

Installation Procedure

    Object Number: 629632 Size: SH
  1. Connect the wiring harness connector (3) to the inflatable restraint IP module switch (4) connector.
  2. Install the CPA (2) on the wiring harness connector (3).
  3. Insert the inflatable restraint IP module switch (4) into the switch mounting in the instrument panel (IP) compartment door (1) and snap into place.
  4. Close the instrument panel (IP) passenger compartment door (1).