For 1990-2009 cars only
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn the ignition switch to the OFF position.
- Remove the key from the ignition switch.
- Remove the front floor kick-up panel. Refer to Kick-Up Panel Replacement - Front Floor in Interior Trim.
- Remove the SDM Fuse from the IP fuse block.
- Remove the sound insulator-LH. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gauges and Console.
- Remove the connector position assurance (CPA) from the driver yellow 2-way connector (C211) located at the base of the steering column.
- Disconnect the driver yellow 2-way connector located at the base of the steering column.
- Remove the connector position assurance (CPA) from the passenger yellow 2-way connector (C213) located near the base of the steering column.
- Disconnect the passenger yellow 2-way connector located near the base of the steering column.
Important: With the SDM Fuse removed and the ignition switch in the ON position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.
