Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Remove the lower steering column trim cover. Refer to Steering Column Trim Covers Replacement .

1

Ignition Switch Electrical Connector

2

Ignition Switch Screw (Qty: 2)

Torque
0.74 N·m (7 lb in)

3

Ignition Switch

Tip

1. The ignition lock cylinder must be in the run position prior to removal of the ignition switch or damage to the components can occur.
2. Reprogram the theft deterrent system. Refer to Programming Theft Deterrent System Components .