Engine Flywheel Replacement with Automatic Transmission

Special Tools

J 45059 Angle Meter

1. Remove the transmission. Refer to Transmission Replacement in Automatic Transmission - 4L60-E/4L65-E.



2. Remove the flywheel bolts.

Discard the bolts.

3. Remove the flywheel.
4. Clean and inspect the flywheel. Refer to Engine Flywheel Cleaning and Inspection .

1. Position the flywheel to the crankshaft

Notice: Refer to Fastener Notice in the Preface section.

2. Install the new flywheel bolts.

Tighten

1. Tighten the flywheel bolts to 40 N·m (30 lb ft).
2. Use the J 45059 to rotate the flywheel bolts an additional 45 degrees.
3. Install the transmission. Refer to Transmission Replacement in Automatic Transmission - 4L60-E/4L65-E.

Engine Flywheel Replacement with Manual Transmission

Special Tools

J 45059 Angle Meter

1. Remove the clutch assembly. Refer to Clutch Assembly Replacement in Clutch.



2. Remove the flywheel bolts.

Discard the bolts.

3. Remove the flywheel.
4. Clean and inspect the flywheel. Refer to Engine Flywheel Cleaning and Inspection .

1. Position the flywheel to the crankshaft

Notice: Refer to Fastener Notice in the Preface section.

2. Install the new flywheel bolts.

Tighten

1. Tighten the flywheel bolts to 40 N·m (30 lb ft).
2. Use the J 45059 to rotate the flywheel bolts an additional 45 degrees.
3. Install the clutch assembly. Refer to Clutch Assembly Replacement in Clutch.