Tools Required

1. Place the wiper arms in the 1/2 wipe position.
2. Turn the ignition key to the OFF position.



3. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
4. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.



5. Remove the wiper transmission (3). Refer to Windshield Wiper Transmission Replacement .
6. Using the J 39232 , separate the transmission link from the wiper motor crank arm ball stud.
7. Remove the fasteners from the wiper motor to the frame assembly.
8. Remove the wiper motor.

1. Install the wiper motor onto the wiper transmission frame.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts in order to secure the motor to the frame.

Tighten
Tighten the wiper motor mounting bolts to 9 N·m (81 lb in).





Important: Lubricate the socket with Multi-Purpose Lubricant, Superlube, GM P/N 12346241 (Canadian P/N 10953474) or equivalent.

3. Install the transmission drive link socket onto the crank arm ball of the wiper motor using the J 39529 .



4. Install the wiper transmission (3) to the plenum. Refer to Windshield Wiper Transmission Replacement .