GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1352013  Size: SH
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor nuts.
  3. Remove the APP sensor from the vehicle.

Installation Procedure


    Object Number: 1352013  Size: SH
  1. Position the APP sensor over the studs.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the APP sensor nuts.
  4. Tighten
    Tighten the APP sensor mounting nuts to 9 N·m (80 lb in).

  5. Connect the APP sensor electrical connector.
  6. Inspect below the pedal for binding, to ensure full range of motion.