Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Dimming Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Do the park lamps operate properly? | Go to Step 3 | Go to Park Lamps Inoperative |
3 |
Do the instrument panel lamps operate properly? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 4 |
4 |
Does the back lighting illuminate? | Go to Step 5 | Go to Step 6 |
5 | Connect the fused jumper wire between the I/P dimmer switch signal circuit and the I/P dimmer switch ground circuit. Does the back lighting illuminate? | Go to Step 8 | Go to Step 7 |
6 | Test the I/P dimmer switch signal circuit for an open, high resistance, or short to ground. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 9 |
7 | Test the I/P dimmer switch ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs . Did you complete the repair? | Go to Step 12 | -- |
8 | Inspect for poor connections at the I/P dimmer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
9 | Inspect for poor connections at the body control module (BCM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 11 |
10 | Replace the I/P dimmer switch. Refer to Instrument Panel Lamp Dimmer Switch Replacement . Did you complete the replacement? | Go to Step 12 | -- |
11 | Replace the BCM. Refer to Control Module References for replacement, setup, and programming. Did you complete the repair? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
