Schematic Reference: Exterior Lights Schematics

Connector End View Reference: Lighting Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Turn ON the ignition, with the engine OFF.
2. Place the gear selector in park or neutral.

Do the backup lamps illuminate?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections

Disconnect the backup lamp switch, for manual transaxle or the park neutral position switch, for automatic transaxle.

Are the backup lamps illuminated?

Go to Step 4

Go to Step 5

Repair the short to battery positive voltage in the backup lamp supply voltage circuit. Refer to Circuit Testing and Wiring Repairs .

Did you complete the repair?

Go to Step 6

--

Replace the appropriate switch. Refer to Backup Lamp Switch Replacement or Park/Neutral Position Switch Replacement .

Did you complete the replacement?

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3