GM Service Manual Online
For 1990-2009 cars only

    Object Number: 412197  Size: SH
  1. Install the hydraulic lash adjusters into their bores in the cylinder head. Apply lubricant GM P/N 12345501 (Canadian P/N 992704) or equivalent.

  2. Object Number: 412514  Size: SH
  3. Lubricate the valve tips with GM P/N 12345501 (Canadian P/N 992704) or equivalent.

  4. Object Number: 412194  Size: SH

    Important: Used roller followers must be returned to the original position on the camshaft. If the camshaft is being replaced, the roller followers actuated by the camshaft must also be replaced.

  5. Position the roller followers on the tip of the valve stem and on the lash adjuster, apply lubricant GM P/N 12345501 (Canadian P/N 992704) or equivalent.

  6. Object Number: 412191  Size: SH
  7. Set the exhaust camshaft on top of the roller followers in the camshaft journals. Lubricate with GM P/N 12345501 (Canadian P/N 992704) or equivalent.
  8. Install the camshaft caps and hand start the camshaft cap bolts.
  9. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 466547  Size: SH
  10. The timing chain sprocket alignment notch should be oriented to the 2 o' clock position.
  11. Tighten the camshaft bearing cap bolts in increments of 3 turns until they are seated, lubricate.
  12. Tighten
    Tighten the camshaft caps to 10 N·m (89 lb in).