- Clean the clutch housing and rear case
in a suitable solvent. Air dry the clutch housing and rear case.
- Inspect the rear case extension bushing for wear or damage.
- Replace the rear case if the extension bushing is faulty. The
bushing is not serviceable.
- Clean all sealant material from retainer bolt threads.
- Inspect the cases for the following conditions:
| • | Nicked mounting surfaces |
| • | Damaged sealing surfaces |
| • | Damaged front or rear bearing bores |
- Inspect the machined mating surfaces
for flatness with a straight edge.
- Inspect the bearing races and bores for wear, scratches or grooves.
- Inspect for loose or missing dowel pins.
- Use a soft stone to dress minor scratches or burrs.
- If scratches, grooves or scoring cannot be removed by hand with
a soft stone or crocus cloth, replace the component.
- Clean up damaged threads with the correct size tap.
- Replace a cracked housing.
