GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Cobalt 🢒 Transmission/Transaxle 🢒 Manual Transmission - Tremec 6-Speed 🢒 Transmission Case and Adapter Disassemble

Transmission Case and Adapter Disassemble CTS, GTO, SSR M10

Transmission Case

Tools Required

    • J 8092 Drive Handle
    • J 23907 Slide Hammer
    • J 39439-2 Bushing Remover
    • J 39790 Mainshaft Bearing Race Remover
    • J 39791 Countershaft Bearing Race Remover

    Object Number: 672686 Size: SH
  1. Remove the transmission case fill plug.
  2. Remove the temperature switch (M12 only).

    3. Object Number: 38364 Size: SH
  3. Remove the backup lamp switch.

    4. Object Number: 38365 Size: SH
  4. Remove the dowel pins.

    5. Object Number: 38376 Size: SH

    Important: Do not replace the bearing race unless inspection shows bearing race damage.

  5. Remove the countershaft bearing race, using the J 8092 and the J 39791 .

    6. Object Number: 38370 Size: SH

    Important: Do not replace the bearing race unless inspection shows bearing race damage.

  6. Remove the mainshaft bearing race, using the J 8092 and the J 39790 .

    7. Object Number: 38371 Size: SH
  7. Remove the Ist/2nd and the 3rd/4th shift shaft bushings, using the J 23907 and the J 39439-2 .

Adapter Plate

Tools Required

    • J 23907 Slide Hammer
    • J 39439-2 Bushing Remover

    Object Number: 38349 Size: SH
  1. Remove the input shaft bearing race and the shim.

    2. Object Number: 38350 Size: SH
  2. Remove the countershaft bearing race and the shim.

    3. Object Number: 351950 Size: SH
  3. Remove the adapter plate plug.

    4. Object Number: 38352 Size: SH
  4. Remove the input shaft seal.

    5. Important: Do not replace the bushing unless inspection shows bushing damage.


    Object Number: 38354 Size: SH
  5. Remove the 1st/2nd and the 3rd/4th shift shaft bushing, using the J 23907 with the J 39439-2 .

    6. Object Number: 38355 Size: SH
  6. Remove the dowel pins.

Transmission Case and Adapter Disassemble Corvette MM6 and MZ6

Transmission Case

Tools Required

    • J 8092 Universal Driver Handle
    • J 23907 Slide Hammer
    • J 39439-2 Bushing Remover
    • J 39790 Mainshaft Bearing Race Remover
    • J 39791 Countershaft Bearing Race Remover

    Object Number: 1538828 Size: SH
  1. Remove the transmission case fill plug (1) (MM6 only).
  2. Remove the coolant temperature switch (2) (MZ6 only).

    3. Object Number: 1538829 Size: SH
  3. Remove the reverse lamp switch (MM6 only).

    4. Object Number: 1538831 Size: SH
  4. Remove the E-Z key switch (1) (MZ6 only).

    5. Object Number: 38365 Size: SH
  5. Remove the dowel pins.

    6. Object Number: 38376 Size: SH

    Important: Do not replace the bearing race unless inspection shows bearing race damage.

  6. Remove the countershaft bearing race, using the J 8092 and the J 39791 .

    7. Object Number: 38370 Size: SH

    Important: Do not replace the bearing race unless inspection shows bearing race damage.

  7. Remove the mainshaft bearing race, using the J 8092 and the J 39790 .

    8. Object Number: 38371 Size: SH
  8. Remove the 1st/2nd and the 3rd/4th shift shaft bushings, using the J 23907 and the J 39439-2 .

Adapter Plate

Tools Required

    • J 23907 Slide Hammer
    • J 39439-2 Bushing Remover

    Object Number: 350571 Size: SH
  1. Remove the input shaft bearing race and the shim.

    2. Object Number: 350574 Size: SH
  2. Remove the countershaft bearing race and the shim.

    3. Object Number: 351950 Size: SH
  3. Remove the adapter plate plug (MM6 only).

    4. Object Number: 350576 Size: SH
  4. Remove the input shaft seal.

    5. Object Number: 388468 Size: SH

    Important: Do not replace the bushing unless inspection shows bushing damage.

  5. Remove the 1st/2nd and the 3rd/4th shift shaft bushing, using the J 23907 with the J 39439-2 .

    6. Object Number: 388474 Size: SH
  6. Remove the 1st/2nd and the 3rd/4th shift shaft seals (1) and (2).

    7. Object Number: 350579 Size: SH
  7. Remove the dowel pins.