GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Cobalt 🢒 Transmission/Transaxle 🢒 Automatic Transmission - Allison 🢒 Four-Wheel-Drive Output Shaft Bushing Inspection

    Object Number: 1217032 Size: SH
  1. Inspect the output shaft bushing (2) for wear or damage.
  2. Measure the inside diameter (ID) of the bushing (2) at dimension A.
  3. Replace the bushing If the ID of the bushing exceeds specifications.

    4. Specification
    The bushing maximum ID is 20.07 mm (0.794 in).

  4. Measure the outside diameter (OD) of the bearing surface at dimension B.
  5. Replace the output shaft if the OD of the bearing surface is less than specifications.

    6. Specification
    The bearing surface minimum OD is 44.978 mm (1.77 in).