GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Cobalt 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E/4L65-E/4L70-E 🢒 Reaction Carrier Shaft Replacement

Removal Procedure

Tools Required

    • J 8092 Universal Driver Handle - 3/4 in - 10
    • J 7004-A Universal Remover
    • J 23907 Slide Hammer with Bearing Adapter
    • J 25019-14 Stator Pump Bushing Remover
    • J 29369-2 Bushing and Bearing Remover 2-3 in
    • J 34196-B Transmission Bushing Service Set

    Object Number: 5473 Size: SH
  1. Remove the reaction carrier shaft/internal gear retainer (668) and the reaction carrier shaft (666) from the input internal gear (664).
  2. Inspect the reaction carrier shaft (666) and the input internal gear (664) for the following defects:
    3. • Scoring
    • Cracking
    • Damaged or worn bushings
    • A cracked shaft
    • A damaged spline
    • Damaged gear teeth

    Object Number: 5474 Size: SH
  3. Using J 29369-2 with J 23907 , remove the reaction carrier shaft front bushing (665).

    4. Object Number: 5475 Size: SH
  4. Using J 25019-14 with J 7004-A , remove the reaction carrier shaft rear bushing (667).

Installation Procedure

    Object Number: 5476 Size: SH
  1. Using J 34196-3 which is part of kit J 34196-B with J 8092 , install a new reaction carrier shaft front bushing (665).

    2. Object Number: 5477 Size: SH
  2. Using J 34196-3 which is part of kit J 34196-B with J 8092 , install a reaction carrier shaft rear bushing (667).