Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
2. Remove the headliner. Refer to Headlining Trim Panel Replacement .

1

Screw, Inflatable Restraint Roof Rail Module

Tighten
8 N·m (71 lb in)

2

Bolt, Inflatable Restraint Roof Rail Module

Tighten
8 N·m (71 lb in)

3

Bolt, Inflatable Restraint Roof Rail Module

Tighten
8 N·m (71 lb in)

4

Retainer, Inflatable Restraint Roof Rail Module (Qty: 3)

5

Bolt, Inflatable Restraint Roof Rail Module

Tighten
8 N·m (71 lb in)

6

Module Assembly, Inflatable Restraint Roof Rail

Tip

1. Remove the connector position assurance (CPA) retainer.
2. Disconnect the electrical connector.