GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Cobalt 🢒 Engine 🢒 Engine Controls - 2.0L 🢒 Barometric Pressure Sensor Replacement

Removal Procedure

    Object Number: 1389393 Size: SH
  1. Disconnect the barometric pressure (BARO) sensor harness connector.
  2. Remove the BARO sensor bracket and bolt.
  3. Remove the BARO sensor (2).

Installation Procedure

    Object Number: 1389393 Size: SH
  1. Install the BARO sensor (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the BARO sensor bracket and bolt.

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  3. Connect the BARO sensor harness connector.