Callout
| Component Name
|
|
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications:
Refer to
Fastener Tightening Specifications
.
|
Headlamp Capsule Replacement |
1
| Bolt, Front Headlamp Capsule (Qty: 2)
Tip
- Remove the inner upper grille fascia push-pin.
- Pull the lamp forward until the lamp disengages from the lower bracket.
- Push the lower inside corner of the headlamp inboard until the outer lens releases from under the outer fender flange.
- Rock the headlamp composite side to side and pull outward.
- Disconnect the electrical connector.
Tighten
10 N·m (89 lb in) |
2
| Bulbs, Headlamp
Caution: Refer to Halogen Bulb Caution in the Preface section.
Tip
Rotate the bulb/socket counterclockwise to remove from the capsule. |
Headlamp Housing Bracket Replacement |
3
| Bolt, Headlamp Housing Bracket (Qty: 4)
Tighten
10 N·m (89 lb in) |
4
| Bracket, Headlamp housing
|
Fog Lamp Replacement |
5
| Bulb/Socket, Fog Lamp
Tip
| • | Disconnect the electrical. |
| • | Rotate the bulb/socket counterclockwise to remove from the fog lamp. |
| • | The fog lamp bulb/socket can be replaced, without removing the fog lamp. |
|
6
| Lamp, Fog
Tip
| • | Disconnect the electrical connector from the fog lamp bulb/socket. |
| • | Release the fog lamp from the front fascia. |
|
