| Table 1: | Indicators |
| Table 2: | Driver Information Center |
Symbol | Description |
|---|---|
| ABS: Refer to ABS Description and Operation |
| Air Bag: Refer to SIR System Description and Operation |
(Export) BRAKE | Brake: Refer to Brake Warning System Description and Operation |
| Charge: Refer to Charging System Description and Operation |
| Engine Coolant Temperature: Refer to Cooling System Description and Operation |
| The instrument panel cluster (IPC) illuminates the engine oil pressure (EOP) indicator when the powertrain control module (PCM)/engine control module (ECM) detects the EOP is low from the EOP sensor/switch. The PCM/ECM sends a GMLAN serial data message to the body control module (BCM) indicating a low EOP condition. The IPC receives a GMLAN message from the BCM requesting the EOP indicator. |
| Front Fog Lamps: Refer to Exterior Lighting Systems Description and Operation |
| High Beam: Refer to Exterior Lighting Systems Description and Operation |
| MIL: Refer to Powertrain Control Module Description for the 2.0L engine or Engine Control Module Description for the 2.2L engine |
| Seatbelt: Refer to Seat Belt System Description and Operation |
| Security: Refer to Theft Systems Description and Operation |
| Traction Disabled: Refer to ABS Description and Operation |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation |
| The Upshift indicator notifies the driver when to shift the transmission. The instrument panel cluster (IPC) illuminates the Upshift indicator as determined by the powertrain control module (PCM)/engine control module (ECM). The IPC receives a GMLAN serial data message from the body control module (BCM) requesting illumination of the indicator. |
Symbol | Description | ||||
|---|---|---|---|---|---|
AUTO LIGHTS OFF | Refer to Exterior Lighting Systems Description and Operation | ||||
AUTO LIGHTS ON | Refer to Exterior Lighting Systems Description and Operation | ||||
BATTERY SAVER ACTIVE | |||||
BRAKE FLUID | |||||
CHARGING SYSTEM ACTIVE | |||||
CHANGE OIL SOON | The driver information center (DIC) displays the CHANGE ENGINE OIL message when the powertrain control module (PCM)/engine control module (ECM) determines that the engine oil life is 0 percent. The PCM/ECM sends a GMLAN serial data message to the BCM to request the DIC to display the CHANGE ENGINE OIL message. After the oil is changed, reset the engine oil monitor. Refer to GM Oil Life System Resetting . | ||||
CHECK GAS CAP | Refer to Indicator/Warning Message Description and Operation | ||||
CRUISE CONTROL ACTIVE | |||||
DOOR AJAR | |||||
ENG PWR REDUCED | |||||
ICE POSSIBLE | The driver information center (DIC) displays the ICE POSSIBLE message when the outside air temperature drops below 2°C (36°F). When the temperature rises above 5.5°C (42°F), the ICE POSSIBLE message turns OFF. The DIC receives a GMLAN message indicating the outside air temperature from the body control module (BCM). | ||||
KEY FOB BATT LOW | |||||
LOW COOLANT | |||||
LOW FUEL | The driver information center (DIC) displays the low fuel indicator as determined by the powertrain control module (PCM)/engine control module (ECM). The PCM/ECM monitors the fuel level sensor signal and will request the LOW FUEL message from the body control module (BCM) when the fuel level is less than 14 percent. The DIC receives a GMLAN message from the BCM requesting display of the LOW FUEL message. | ||||
LOW OIL LEVEL | The driver information center (DIC) displays the LOW OIL LEVEL message when the powertrain control module (PCM)/engine control module (ECM) detects a low oil level condition from the engine oil level sensor/switch. The PCM/ECM sends a GMLAN serial data message to the body control module (BCM) requesting a low oil level message. The DIC receives a GMLAN message from the BCM requesting the engine oil level message. | ||||
LOW WASHER FLUID | |||||
LOW TRACTION | Refer to ABS Description and Operation | ||||
POWER STEERING | |||||
PARKING BRAKE | |||||
SERVICE AIR BAG | Refer to SIR System Description and Operation | ||||
SERVICE VEHICLE SOON | The driver information center (DIC) displays the SERVICE VEHICLE SOON message when the following conditions exists:
| ||||
STARTING DISABLED | |||||
TRUNK AJAR |
