For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the condenser bolts.
- Slide the condenser down to disengage the upper mounting tabs from the radiator. Position the condenser away from the radiator and support the condenser.
- Remove the right and left radiator side baffles.
Important: You are not required to discharge the A/C system.
Installation Procedure
- Install the right and left radiator side baffles.
- Slide the condenser up to engage the upper mounting tabs into the radiator.
- Install the condenser bolts.
- Lower the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts to 10 N·m (88 lb in).
