GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Classic 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Console Replacement

Removal Procedure
  1. Remove the front seats from the vehicle. Refer to Seat Replacement in Seats.
  2. Fold the console compartment up.
  3. Remove the rear cupholder from the center console.
  4. Remove the console trim plate. Refer to Console Trim Plate Replacement .

    5. Object Number: 291499 Size: SH
  5. Remove the console screws from the center console.
  6. Remove the center console (2) from the vehicle.

Installation Procedure

    Object Number: 291499 Size: SH
  1. Install the center console (2) into the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the console screws into the center console.

    3. Tighten
    Tighten the screws to 2.3 N·m (20 lb in).

  3. Install the console trim plate. Refer to Console Trim Plate Replacement .
  4. Install the rear cupholder to the center console.
  5. Install the front seats into the vehicle. Refer to Seat Replacement in Seats.