GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Classic 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure
  1. Remove the rear compartment lamp housing for access. Refer to Rear Compartment Courtesy Lamp Replacement.

    2. Object Number: 329501 Size: SH
  2. Look for the mounting tabs just to the right of the center access hole on the rear package shelf. Compress the tabs and slide the receiver down through the access hole.
  3. Disconnect the electrical connector from the remote door lock receiver.
  4. Remove the remote door lock receiver.

Installation Procedure
  1. Connect the electrical connector.

    2. Object Number: 329501 Size: SH
  2. Install the receiver through the access hole. Snap the mounting tabs into place.
  3. Install the rear compartment lamp housing. Refer to Rear Compartment Courtesy Lamp Replacement.
  4. Reprogram the new receiver to transmitters. Refer to Control Module References for programming and setup information.