Rear Seat Riser Finish Cover Replacement. Chevrolet Chevy Suburban

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Chevy Suburban - 4WD 🢒 Hybrid 🢒 Hybrid Energy Storage 🢒 Rear Seat Riser Finish Cover Replacement

Rear Seat Riser Finish Cover Replacement Tahoe/Yukon/Escalade w/Bucket

Callout	Component Name
Preliminary Procedures Flip and fold the rear seat forward. Remove the rear seat floor filler trim cover.
1	Rear Seat Riser Finish Cover Screw Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Rear Seat Riser Finish Cover
3	Rear Seat Riser Finish Cover

Callout	Component Name
Preliminary Procedures Flip and fold the rear seat forward. Remove the rear seat floor filler trim cover.
1	Rear Seat Riser Finish Cover Screw (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Rear Seat Riser Finish Cover (Qty: 2)
3	Rear Seat Riser Finish Cover (Qty: 2)

Callout	Component Name
1	Rear Seat Track Finish Cover
2	Rear Seat Track Finish Cover Retainer Clip (Qty: 3)

Callout	Component Name
Preliminary Procedure Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete. Flip and fold the rear seat forward.
1	Rear Seat Frame Outer Finish Cover Procedure Pull upward to disengage the retainer clips.
2	Rear Seat Riser Finish Cover Procedure For reinstallation use the 3 locators to align part properly. Engage upper and lower front clips to the back edge of rear seat frame front finish cover. To finish installation process move rearward along the cover. Part is properly installed when all edges are aligned with rear seat frame front finish cover.

Callout

Component Name

Turn the ignition switch to the off/lock position, remove the ignition key and secure in technicians pocket until procedure is complete.
Flip and fold the rear seat forward.

Rear Seat Frame Outer Finish Cover

Pull upward to disengage the retainer clips.

Rear Seat Riser Finish Cover

Procedure

For reinstallation use the 3 locators to align part properly.
Engage upper and lower front clips to the back edge of rear seat frame front finish cover. To finish installation process move rearward along the cover. Part is properly installed when all edges are aligned with rear seat frame front finish cover.