Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

1

Front Position Sensor Link

Tip
Disconnect the link from the sensor ball stud.

2

Front Position Sensor Bolt

Tip
Remove the bolt from the sensor.

Tighten
12 N·m (106 lb in)

3

Front Position Sensor

Tip
Disconnect the electrical connector from the sensor.