Important: Note the location of the wiper on the glass before removal.

1. Disconnect the washer hose.
2. Swivel the wiper arm cover open.
3. Remove the nut retaining the wiper arm to the wiper motor.
4. Remove the wiper arm from the liftgate.

1. Align the wiper arm to the vehicle.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the nut retaining the wiper arm to the wiper motor.

Tighten
Tighten the nut to 23 N·m (17 lb ft).

3. Swivel the wiper arm cover closed.
4. Connect the washer hose to the wiper arm.
5. Check the rear wiper for proper operation.