Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement Escalade

1. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement in Instrument Panel, Gages, and Console.



2. Disconnect the yaw rate sensor/lateral accelerometer electrical connector.
3. Remove the 3 yaw rate sensor/lateral accelerometer nuts.
4. Remove the yaw rate sensor/lateral accelerometer from the vehicle.

Important: Use care not to bend or distort the bracket that supports the yaw rate sensor/lateral accelerometer.

1. Install the yaw rate sensor/lateral accelerometer to the bracket.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the 3 yaw rate sensor/lateral accelerometer nuts to the bracket.

Tighten
Tighten the nuts to 10 N·m (89 lb in).

3. Connect the yaw rate sensor/lateral accelerometer electrical connector.
4. Install the front floor bezel. Refer to Floor Console Bezel Replacement in Instrument Panel, Gages, and Console.

Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement Escalade EXT

1. Remove the passenger seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Pull the carpet back to gain access to the sensor.



3. Remove the nuts retaining the yaw rate sensor/lateral accelerometer (2) to the vehicle.



4. Disconnect the electrical connector from the yaw rate sensor/lateral accelerometer.
5. Remove the yaw rate sensor/lateral accelerometer from the vehicle.

Important: Use care not to bend or distort the bracket that supports the yaw rate sensor/lateral accelerometer.




1. Install the yaw rate sensor/lateral accelerometer to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the nuts retaining the yaw rate sensor/lateral accelerometer to the vehicle.

Tighten
Tighten the nuts to 10 N·m (89 lb in).




3. Connect the electrical connector (3) to the yaw rate sensor/lateral accelerometer.
4. Install the carpet.
5. Install the passenger seat to the vehicle. Refer to Front Seat Replacement - Bucket .